ELDI · Drivetrain & Chassis
Sprocket puller fixture Sachs 125
For Hercules K 125 BW, GS, MC, K 125 T and others with a Sachs 125 engine; protects the speedo drive
- Article
- EAN
- 4057233074168
- Weight
- 0.16 kg
- Category
- Drivetrain and chassis tools
- Brand
- ELDI, Ellinghaus & Dickmann
Price and availability in the shop. Article MG00008874.
ELDI · MG00008874 · WUPPERTAL
What the tool does
A hardened pulling fixture that is fitted around the drive sprocket of the Sachs 125 engine. This lets a standard 2 or 3 leg puller engage the sprocket without loading the speedo drive housing. Supplied with instructions.
When you need it
When the sprocket on the Sachs 125 sits tight on the shaft and legs applied directly to the sprocket would damage the speedo drive.
How to use it
Remove the sprocket nut, take off the locking tab.
Fit the fixture behind the sprocket as per the instructions.
Fit a leg puller onto the fixture, tighten the pressure screw against the shaft.
Remove the sprocket, secure the key.
Legs gripping directly on the sprocket press on the speedo drive housing in the casing and break it out. The casing is then scrap.
The leg puller is not included. A simple 2 leg puller with a 75 to 100 mm span is enough.
Fits
- Hercules K 125 BW, GS, MC, K 125 T
- KTM, DKW, Rixe, Horex with a Sachs 125 cc engine
Vehicle data according to the manufacturer data in the shop. If in doubt, measure thread and dimensions on the vehicle.
eldi.de/en/tools/antrieb-fahrwerk/ritzelabzieher-sachs-125/ · Article MG00008874 · EAN 4057233074168
