ELDI · Drivetrain & Chassis
Sprocket puller fixture Sachs 50
For Hercules K 50, Sachs S and GS 75, and other Sachs engines; with instructions
- Article
- EAN
- 4057233074380
- Weight
- 0.08 kg
- Category
- Drivetrain and chassis tools
- Brand
- ELDI, Ellinghaus & Dickmann
Price and availability in the shop. Article MG00008897.
ELDI · MG00008897 · WUPPERTAL
What the tool does
The smaller sibling of the 125 cc fixture: a hardened pulling fixture for the drive sprocket of the Sachs 50 cc engines. It gives a standard 2 or 3 leg puller a clean point to engage behind the sprocket. Supplied with instructions.
When you need it
When the sprocket sits tight on the gearbox shaft and would only come off with force or with damage to the casing without the fixture.
How to use it
Remove the sprocket nut and its locking device.
Fit the fixture behind the sprocket as per the instructions.
Fit a leg puller onto the fixture and pull it off evenly.
Secure the key, clean the shaft stub.
Legs gripping directly behind the sprocket slip off or press against the shaft seal and the casing.
The leg puller is not included. A 2 leg puller with a 50 to 75 mm span fits.
Fits
- Hercules K 50, Sachs S, GS 75
- Other models from Hercules, KTM, DKW and others with a Sachs engine
Vehicle data according to the manufacturer data in the shop. If in doubt, measure thread and dimensions on the vehicle.
eldi.de/en/tools/antrieb-fahrwerk/ritzelabzieher-sachs-50/ · Article MG00008897 · EAN 4057233074380
