ELDI · Ignition
Degree wheel 120 mm (German made)
Plastic degree wheel, 6 mm bore, made in Germany
- Article
- EAN
- 4057233171829
- Weight
- 0.02 kg
- Category
- Ignition tools
- Brand
- ELDI, Ellinghaus & Dickmann
Price and availability in the shop. Article MG00088451.
ELDI · MG00088451 · WUPPERTAL
What the tool does
The German made version of the ELDI degree wheel: 120 mm diameter, 6 mm bore, 0.8 mm polystyrene. Fitted onto the crankshaft or via a flywheel adapter, pointer made from about 2 mm wire.
When you need it
Setting ignition timing in degrees, measuring port timing, measuring a tuning cylinder.
Drag to turn · pointer on the casing · 5° detents
Interactive degree wheel: drag, detents every 5 degrees.
How to use it
Determine TDC with a TDC finder or dial gauge, set the wheel to 0.
Fix the wire pointer to the casing.
Read off the opening point (test lamp) or port edge clearance (port timing) in degrees.
Without a degree wheel, port timing cannot be measured and ignition values cannot be converted into degrees.
This tool is functionally identical to the Swedish version; the difference is the place of manufacture. For determining top dead centre, the manufacturer recommends a TDC finder.
Fits
- Zündapp, Kreidler, Hercules, Puch, Miele, DKW, KTM, Rixe
- Bosch, Ducati, Motoplat and Noris ignition systems
Vehicle data according to the manufacturer data in the shop. If in doubt, measure thread and dimensions on the vehicle.
eldi.de/en/tools/zuendung/gradscheibe-120mm-de/ · Article MG00088451 · EAN 4057233171829
